Replacing the Mitsubishi L300 Steering gear box MB501185 is a crucial maintenance task that ensures the vehicle’s steering remains safe and responsive. Whether you’re an experienced DIY mechanic or a beginner with some technical skills, this step-by-step guide will walk you through the complete replacement process. Using the correct tools and following proper safety procedures are essential to complete this job efficiently.

Understanding the Mitsubishi L300 Steering Gear Box MB501185

Before diving into the replacement steps, it’s important to understand what the Mitsubishi L300 Steering gear box MB501185 does. The steering gear box converts the rotational movement of the steering wheel into the linear motion needed to turn the wheels. Over time, this part can wear out, leading to issues like loose steering, unusual noises, or fluid leaks.

Tools and Equipment Required

To replace the Mitsubishi L300 Steering gear box MB501185, you will need the following tools:

• Jack and jack stands
• Wheel chocks
• Socket set and ratchet
• Wrenches (including adjustable)
• Pitman arm puller
• Screwdrivers
• Hammer
• Penetrating oil
• Torque wrench
• Drain pan
• Power steering fluid
• Replacement part: Mitsubishi L300 Steering gear box MB501185

Step-by-Step Guide to Replacing the Gear Box

Step 1: Preparation and Safety

Start by parking the vehicle on a flat, stable surface. Engage the parking brake and place wheel chocks behind the rear tires to prevent movement. Disconnect the negative battery terminal to avoid any accidental electrical shorts.

Step 2: Raise the Vehicle

Use a jack to lift the front of the L300 and place it securely on jack stands. Ensure the vehicle is stable before working underneath it. Removing the front wheels may give you better access to the steering components.

Step 3: Locate the Steering Gear Box

The Mitsubishi L300 Steering gear box MB501185 is typically mounted on the vehicle’s chassis and connected to the steering column and pitman arm. Identify all mounting points and connected components including hydraulic lines if your model has power steering.

Step 4: Remove the Pitman Arm

Use a pitman arm puller to safely remove the pitman arm from the gear box output shaft. This step may require some effort, especially if the part has been in place for a long time. Apply penetrating oil to ease the process.

Step 5: Disconnect Steering Linkages

Remove the tie rods or any other linkages connected to the pitman arm. Label them if needed to ensure correct reinstallation later. Be careful not to damage the threads or rubber components.

Step 6: Disconnect Steering Shaft

Inside the engine bay or underneath the dashboard, locate the steering column shaft where it connects to the gear box input shaft. Loosen and remove the bolt or clamp securing the shaft. Slide the shaft away from the box carefully.

Step 7: Disconnect Hydraulic Lines (if applicable)

If your L300 has power steering, use a drain pan to catch any fluid as you disconnect the hydraulic lines from the gear box. Use flare nut wrenches to prevent damage to fittings. Cap or plug the lines to prevent contamination.

Step 8: Unbolt and Remove the Gear Box

Use your socket set and ratchet to remove the bolts securing the Mitsubishi L300 Steering gear box MB501185 to the vehicle’s chassis. Once unbolted, carefully lower the gear box and remove it from the vehicle. This part can be heavy, so ensure a solid grip and clear path.

Step 9: Prepare the Replacement Gear Box

Compare the old and new gear boxes side by side to ensure the replacement part matches exactly. If your new Mitsubishi L300 Steering gear box MB501185 is pre-lubricated and pre-adjusted, you can proceed. Otherwise, follow manufacturer instructions for any necessary preparation.

Step 10: Install the New Gear Box

Lift the new gear box into place and align it with the mounting holes. Insert and hand-tighten the bolts first, then torque them to the manufacturer’s specifications. This ensures the gear box is securely fastened.

Step 11: Reconnect the Steering Shaft

Slide the steering shaft back onto the input of the new gear box. Align the marks or splines, then tighten the bolt or clamp securely. Confirm there is no excessive play or misalignment.

Step 12: Reattach Hydraulic Lines (if applicable)

Reconnect the power steering lines to the new gear box. Tighten the fittings properly and make sure there are no leaks. Refill the power steering reservoir with the recommended fluid type.

Step 13: Install the Pitman Arm

Attach the pitman arm to the new gear box output shaft, making sure it aligns properly. Use the pitman arm puller in reverse to press it into place. Torque the retaining nut to specification.

Step 14: Reconnect Linkages

Reconnect all steering linkages, tie rods, and other components removed earlier. Double-check each connection for tightness and proper alignment.

Step 15: Lower the Vehicle and Reconnect Battery

Once all components are reinstalled and secured, lower the vehicle off the jack stands. Reconnect the negative battery terminal to restore electrical power.

Step 16: Test the Steering System

Start the engine and let it idle. Turn the steering wheel left and right several times to bleed any air from the system (for power steering models). Check the fluid level and add more if necessary. Listen for unusual noises and ensure smooth, responsive steering.

Step 17: Final Inspection

Take the vehicle for a test drive at low speed to confirm everything is functioning correctly. Look for signs of leaks, misalignment, or difficulty in steering. Recheck all bolts and fittings after a short drive to ensure they are still tight.

Tips for a Successful Replacement

• Always use a high-quality Mitsubishi L300 Steering gear box MB501185 to ensure long-term performance.
• If unsure about the alignment of steering components, consult a repair manual or a professional.
• After installation, it’s a good idea to have a professional wheel alignment done.
• Dispose of old fluid and parts responsibly according to local regulations.

Conclusion

Replacing the Mitsubishi L300 Steering gear box MB501185 is a manageable task with the right preparation, tools, and step-by-step guidance. Ensuring that your steering system is in top shape not only improves driving comfort but also enhances road safety. With careful attention to detail and proper installation, your L300 will be back on the road with precise, reliable steering performance.

Ask ChatGPT